-
Dispensing, ShankBeer Faucet Shanks
For the 3.5″
Chrome plated brass shank comes with a back nut, plastic collar, and a welded 3/16″ nipple. Requires a 1″ hole saw for installation. Due to the length of…
-
Draft EquipmentBeer Hose, Clear, 50′ x 3/16″ Coil
3/16″ I.D. vinyl tubing is used for the beer hose in most applications where the distance between the keg and the faucet is less than 5’. The small I.D. (inside…
-
Brewhouses, Brewing, Fermenting, Measuring and Testing, Tank AccessoriesBimetal Thermometer | MNPT 1/2 in. 0 – 250 Degree x 6 in. Probe, Rear Mount – SS304
Glacier Tanks Bimetal Thermometers, manufactured by REOTEMP, are reliable and accurate temperature sensors requiring no electricity or wiring. They can be recalibrated with a turn of the calibration screw on…
-
Measuring and TestingBrewBuilt™ 1.5 in. T.C. Pressure Gauge (0-30 psi) – Stainless
This 1.5″ tri-clamp pressure gauge is included with the BrewBuilt™ Kit for Fermenting Under Pressure but can be used with any stainless steel conical fermenter with 1.5″ T.C. ports. Liquid…
-
Spray Ball, Tank AccessoriesBrewBuilt™ CIP Spray Ball – 1.5 in. T.C – Rotating
BrewBuilt CIP Spray Ball for any stainless steel fermenter with 1.5″ tri-clamp fittings. The head emits a 360° fan spray that cleans above and below the spinning ball. The sharp…
-
Brewhouses, Brewing
Brewhouses – 3 Tank
Milling System 300-500Kg/h
10BBL-2 Vessel Brewhouse System (MLT&KWT)
20BBL Hot Water System
10BBL Fermentation Tank/Unitank (Side man hole with Carbonation device)
10BBL Bright beer Tank/Unitank (Side man hole with… -
Home BrewingBrewZilla Gen 4 | All Grain Brewing System | 9.25G
Watch the video introducing the new Gen 4 at https://www.youtube.com/watch?v=0P0o2HjrbWE
WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT…
-
Bright, TanksBrite Tanks
Brite Tanks (Beer Serving Tank)
All parts of METO beer bright tanks are made in top-grade certified stainless steel materials (2B or precise polish for available surface).METO is always attaching high…
-
-
Elbows, Tri-Clamp FittingsButt Weld Elbow 90°
Meet all 3A requirements
Catalog prices are T304, T316L available by request
Catalog sizes 1″, 1 1/2″, 2″ and 2 1/2″. From ½” – 12” available
…
-
Butterfly, ValvesButterfly Valve – 1.5″ TC – 4 Position
Butterfly valves have the distinct advantage over ball valves in that they won’t trap wort inside. They are the most sanitary valve you can ask for and are easy to…
-
Butterfly, ValvesButterfly Valve – 4 Position
Alloy: T316L
Sizes: 1.00″ — 6.00″ OD
Seats: EPDM (standard), Silicone, Viton®
Finish: Polish ID/OD
4 Positions for Throttling the Valve
ABS Black Ball
100% Hydraulic Pressure Tested
- Home
- Categories
- Products
- Knowledge Base/FAQ
- About Us
- Blog
- The Fenix Community
- Use Our Concierge Service!
